Basement Floor Epoxy in Rochester, MN

Free on-site estimate and moisture test.


We coat basement floors in Rochester homes after we test the slab for moisture.


Basement epoxy: $1,200 to $20,000 installed for 300 to 2,000 sq ft.


Moisture test first. We test with ASTM F1869 or ASTM F2170 before any coating goes down.


No coating on a wet slab. Epoxy cannot bond to a wet or humid slab, so the test comes before the quote.


Easy to clean. A seamless sealed floor wipes clean and has no grout lines.

Request a Free Quote

Tell us the room size and any water history. We start with a moisture test.

Free quote. No obligation. No pressure.

Basement Floor Coatings

We Install

Table and chair in a bright room

Solid Color Epoxy

One clean color for utility rooms, laundry areas and storage.

Blue and yellow coated floor

Flake Epoxy System

Decorative flakes hide dust and small flaws. A good fit for rec rooms and workshops.

Shiny coated floor under overhead lights

Metallic Epoxy

A marbled, high-gloss finish for a finished basement or bar area.

White chair on a coated floor

Polyaspartic Topcoat

A clear coat that will not yellow and stands up to scuffs.

Workers coating a large concrete floor

Crack Repair and Prep

We grind the slab and fill cracks before the base coat goes down.

Water reflecting light on a floor

Moisture Testing

ASTM F1869 measures vapor emission. ASTM F2170 measures humidity inside the slab. The coating maker sets the limit.

Basement Floor Epoxy Cost

Typical Basement: $1,200 to $20,000

Installed, for 300 to 2,000 sq ft.

Installed Range: $4 to $10

Per square foot for most residential epoxy.

Full Residential System: $5 to $9

Per square foot for a ground, coated and topcoated floor.

Water-Based Kits: 3 to 5 Years

Water-based epoxy typically lasts 3 to 5 years. Solid epoxy lasts 10 to 20.

Classic cars parked on a coated garage floor

When Can You Use the Basement Again?


Polyaspartic takes foot traffic in 4 to 6 hours. Standard epoxy needs 24 to 72 hours. Most epoxies go on best above 50°F, and cure time doubles for every 18°F drop below 70°F.

Why Test a Rochester Basement First

Moisture sinks coatings. Solid epoxy should not go on floors with moisture problems.

Best conditions. Epoxy goes on best between 60°F and 85°F with humidity under 85 percent.

Long winters. Rochester sees roughly 149 days below freezing a year. Cool slabs cure slower.

Ready for a Basement Floor That Lasts?

Free on-site estimate and moisture test. Call (507) 512-7779 or send the form.

No obligation. No pressure.